Sterilization is any process that eliminates or kills all forms of microbial life. It can be achieved by applying the proper combinations of heat, chemicals, high pressure, and filtration. An autoclave is a device used to sterilize equipment and supplies by subjecting them to high pressure saturated steam at 121 °C for around 15–20 minutes depending on the size of the load and the contents.Autoclaves are widely used in microbiology, medicine, tattooing, body piercing, veterinary science,chiropody and prosthetics fabrication.
SGM vertical autoclaves are specially designed for medical clinical bacteriological & research laboratories Pharmaceuticals, Fertilizer Plant, Breweries soft Drink mfg. etc.
1. Inner made of Stainless Steel and outer made of Mild Steel duly painted.
2. Supporting Ring & Legs are made up of Mild Steel.
3. Heater cover stand and bucket are made of Stainless Steel Sheet.
4. Lid is made of thick machined Mild Steel plate lined with Stainless Steel from inside.
5. Lid is fitted with Pressure Gauge, Spring Loaded Safety Valve, Manual Exhaust Valve, and water level indicator.
6. Drain Valve facilitate easy cleaning of the chamber.
7. Fitted with neoprene rubber gasket.
8. All internal joints are argon arc welded.
9. Piezostat (Pressure Control Switch) and Low Water Level Cut-Off system for general safety of the element are available at an extra cost.
10. Operating range from 15psi to 20psi pressure.
11. To work on 220/230Volts, 50/60Hz AC supply.
1. For use in Hospitals, Dispensaries, Pathology laboratory.
2. Autoclave Vertical are most ideal for critical applications requiring assured and reliable total destruction of all living micro- organisms.
3. Autoclave Vertical is ideal tool for Laboratories, Hospitals, Nursing Homes, R&D labs etc.
SGM Autoclave Horizontal product is embedded with LCD screen and unique power failure memory system to give a good control over the operation. It is also known for its user-friendly operation, sturdy fabrication and easy servicing that can be accessed in various sizes, designs and dimensions. One can access SGM's Autoclave Horizontal Cylindrical at a very reasonable
1. Double walled unit horizontally mounted on a sturdy, heavy M.S. duly painted or stainless steel tubular stand.
2. Both inner chamber and outer wall made of S.S.
3. Pressure is adjustable from 10-20psi.
4. Fitted with pressure gauge, safety valve and steam release valve.
5. Available with separate boiler.
6. For units fitted with S.S. Boiler, separate valves for injecting the steam into the main chamber and releasing the steam in atmosphere after use are provided.
7. Automatic Vacuum Breaker is provided to break the vacuum in case of formation of vacuum due to steam condensation.
8. Automatic Low Water Level Cut-off Device fitted for general safety of the element.
9. Fitted with Automatic Pressure Control Switch.
10. Fitted with Dial thermometer to indicate the inner chamber temperature.
11. Lid is made of S.S. plate provided with radial locking system.
12. Supplied without jacket (Double walled chamber with separate boiler).
13. Industrial grade energy efficient heaters reduce power bills drastically.
Cement Autoclave by SGM is perfect cement testing equipment available today. These industrial cement autoclaves are safe to use and come with durable construction. To deliver long lasting and durable equipment our cement autoclave units are tested up to 2.5times the normal working pressure.
1. Equipped with wing nut locking system.
2. High grade spring loaded safety valve of brass.
3. Fast and reliable accurate results.
4. Versatile usage.
5. Equipped with steam stock provision.
6. Energy Efficient.
7. Tested on up to 2.5 times the normal working pressure.
8. Customized Cement Autoclave Models also available.
It is used for conducting accelerated soundness test on cement.
SGM Steam Autoclave Sterilizers are competent portable autoclaves available today. As leading autoclave manufacturer in India, SGM has expertise in designing and manufacturing of custom portable autoclave, medical autoclave and steam autoclave sterilizers. Portable autoclaves (Pressure Cooker Type) by SGM are perfect for laboratory research and testing and come with simple design that provides easy and safe operation anywhere that has an appropriate power supply. As these units are completely self-contained they do not require plumbing. Our range of portable autoclaves, laboratory sterilizers or steam autoclave sterilizer is reliable and a convenient method for steam and sterilization of medical equipments. These autoclave sterilizers use vaporized water, or steam to sterilize. Our range of portable autoclave often called medical autoclave units also do not require complicated installation.
1. Our portable Autoclaves are most ideal for doctors, nursing homes, laboratories, dentists etc.
2. Portable Autoclave is most ideal for general laboratory requirement where samples in small batches are required to be sterilized.
1. Hydraulically tested upto 40 psi for user safety.
2. Spring loaded safety valve for pressure adjustment and a dead weight valve works as a safety device.
3. Economy at your fingertips with low power consumptions.
4. A seamless (joint less) body for single walled units provides a sturdy and safe operation for the user.
5. Low sterilization process time accounts for higher number of batches accounting for economy and faster results.
Biomedical waste consists of solids, liquids, sharps, and laboratory fritter away that are probably infectious or unsafe and are measured bio waste. It has to be suitably managed to look after the general public, mainly healthcare and sanitation workers who are normally bare to biomedical waste as an occupational risk.
1. Hydraulically operated & PLC.
2. Highly sophisticated Shredder with Hydraulic top pressing arm & front lid.
3. Operation is hydraulic.
4. Entirely enclosed with no chance of aerosol.
5. Automatic turn around rotation under-load.
6. Elective Hydraulic Motor drive for larger size Shredders.
7. Hydraulic Motor make sure high torque compared to electric drive.
8. Network size variable to shred small or big Bio-Medical waste.
9. Low power consumption.
10. Also obtainable without Hydraulic Ram/System.
11. Completely Automatic.
SGM TABLE TOP front loading steam sterilizers is the modern equipments with many controls and safeguards to manage day to day sterilization in the Clinics, Hospitals, O.T.s, and Labs. TABLE TOP is front loading type design, automatic and convenient to operate. After placing instruments in the sterilizer one needs to just set the timer according to sterilizing goods & switch ON and the equipments controls the rest.
1. Table top front loading autoclave.
2. Fully automatic micro-processor based control.
3. Sterilization chamber made up of thick stainless steel sheet, tested for high pressure.
4. Digital timer both for wet & dry cycle.
5. Auto drain of water to reservoir tank & also condensation.
6. Alarm after the total command is completed.
7. Cycle time 10-15 mins.
It guarantees rapid, safe and reproducible sterilization processes. All components’ and options are designed with a long useful life in mind. This Ensures problem-free routine operations. Safe and fast for Liquids, culture media, Instruments, glass and fermenters, Pipette tips, Laundry, textiles and filters, Waste.
1. The chamber of the sterilizer is made of stainless steel.
2. Indicator light indicates working state.
3. Double scale indication pressure gauge.
4. Working temperature 126°c.
5. Time scope: 0-60min.
6. Automatically shut off with beep reminding after sterilization.
7. Easy to operate, safe and reliable.
8. With two stainless steel sterilizing baskets.
1. Ultra-narrow design, only 500 and 600 mm in width.
2. Innovative thermolock pursuant to TRB 402 for liquids.
3. Automatic spent-steam condensation.
4. Versatile control unit, simple for operators and flexible for lab management.
SGM provides Horizontal High Pressure Cylindrical Steam Sterilizer with robust and rigid construction, designed for all type of bulk sterilization which are commonly required in medical, Agriculture and Pharmaceuticals. This is triple walled with steam jacket and separate boiler. The sterilizer has single place door. Inside and outside are made of stainless steel. All constructions are of stainless steel. Complete with dial type thermometer.
1. Steady performance.
2. Noise free performance.
3. Easy to operate and maintain.
4. Wide application.
5. Cost efficient.
The inner chamber, steam jacket, outer chamber and boiler are made of heavy gauge stainless steel with leak proof argon arc welding. The radial locking fid is made of thick S.S. Plate. All units are hydraulically tested up to 40 psi. The space between the outer chamber and steam jacket is fitted with asbestos sheet Or glass wool to minimize thermal losses. Steam boiler is fitted with water level indication, pressure garage, Low water cut-off device and automatic presumer control device. Fitted with a dial thermometer to indicate inner temperature and vacuum breaker to break vacuum in case of formation of cecum due to steam condensation. Two separate valves are provided for evacuating steam from inner chamber and jackets as And when desired. Sterilization Cycle is controlled by Multi port Valve and the unit is fitted with all standard accessories such as Automatic Pressure control Switch and Automatic Low Water Cut-off Device. To work On 440 volts, 3 phase supply
Thank you for taking the time to get to know us better. Kindly submit your requirments. Our Sales Team will contact you at earliest.